Basic models

STARPRIM 1 (ALPHA, BETA, GAMMA)

Choose Basic safes with security level 1.

They are manufactured in accordance with the European burglar resistance standard CEN-EN 1143-1 and the Slovenian standard SIST 1143-1.

Basic safe models

Features of Basic safes

ALPHA SM, BETA SM and GAMMA models

  • The joint between the door and the casing is fitted with insulating tape to protect against flame, smoke, gas and dust.
  • The anchoring preparation is designed as standard and enables the installation of a tear sensor.
  • The hinges allow the door to be opened up to 205°.
  • The DIN 821-D1-80 (b1=75 mm) binders allow for a good and transparent filling of the safe.
  • Colour: RAL 7035 – light gray

ALPHA SM and BETA SM models

  • Three-way locking mechanism with flat latches: 40×10 mm.
  • An overhanging bar on the hinge side provides additional protection.
  • The shelves are adjustable in height every 50 mm.

GAMMA models:

  • Four-way locking mechanism with solid 40 mm round bolts.
  • The shelves are adjustable in height every 50 mm.
Three-way locking mechanism
Three-way locking mechanism

Four-way locking mechanism
Four-way locking mechanism - Gamma models
Burglar resistance 30/50 RU
Burglar resistance 30/50 RU
(RU = resistance grade for partial/complete penetration).
Zavarovalno kritje v primeru vloma
Insurance cover in case of burglary:
EUR 20,000 - without alarm device
EUR 40,000 - with alarm device


Basic safe models and dimensions

Height

Width

Depth

Weight

*The outer depth can be increased by up to 45 mm for a selection of different locks.
** Double-leaf door version.


/images/temp/image1-/starprim1modelskatalog01.webp

Selection of locks for Basic safes

Lock type
(1x level A according to EN 1300)
Availability
Key lock Standard
Key lock + mechanical combination lock On request (surcharge)*
Key lock + electronic combination lock On request (surcharge)*
Mechanical combination lock On request (surcharge)
Electronic combination lock On request (surcharge)

* Does not apply to Basic models 1015/N to 1035/N.


Whole list of locks


Accessories for Basic safes

Type of accessory Availability
Hole in the bottom for anchoring Standard
Pre-preparation for anchoring in the wall Standard
Pre-installation for burglar alarm system On request (surcharge)*
Seal in the door jamb Standard
Shelf On request (surcharge)
Buit-in vault 180 mm high On request (surcharge)**
Built-in vault 360 mm high On request (surcharge)***
Left version On request (surcharge)
Special shade of colour On request (surcharge)
Interior lighting On request (surcharge)

*Does not apply to Basic 1/N ALPHA models (except 1085/N-SM).
**Does not apply to Basic 1035/N and below.
***Does not apply to Basic models below 1085/N-SM and GAMMA.


Whole list of accessories
Burglar alarm system
We offer the possibility of installing burglar alarms.
See "Burglar alarm systems".

Example of a purpose-built interior: 5 built-in vaults

Example of a purpose-built interior with 3 smaller and 1 larger built-in vault, suitable for models:

  • Basic 1095/N-SM,
  • Basic 2095/N-SM,
  • Basic 3095/N-SM, and
  • Basic 4095/N-SM.

Dimensions of clear openings:

  • 4 x upper units : 130 x 167 mm (H x W)
  • 1 x lower unit: 350 x 377 mm (H x W)
  • Usable depth: 225 mm

All vaults can be numbered.

The vault doors are equipped with a digital combination lock with mechanical redundancy. Two modes of lock operation are possible:

  • Private mode - for permanent use of the unit - for a single user.
  • Public mode - for one-time use of the unit - constant code changes. In public mode, the lock code is set for one-time use. The user sets a new code when closing the door and locking the lock. This code is only useful for one unlocking of the lock. A new code must be set for the next time the unit is opened. After use, the lock remains in the unlocked state and is ready for a new user.
Interior equipment of Basic safes

Unlocking the lock with a code
Unlocking the lock with a code

Unlocking the lock with mechanical redundancy
Unlocking the lock with mechanical redundancy

Example of a purpose-built interior: 16 built-in vaults

Example of a purpose-built interior with 15 smaller and 1 larger built-in vaults suitable for models:

  • STARPRIM 1095/N-SM,
  • STARPRIM 2095/N-SM,
  • STARPRIM 3095/N-SM, and
  • STARPRIM 4095/N-SM.

Dimensions of clear openings:

  • 15 x top units: 130 x 167 mm (H x W)
  • 1 x lower unit: 350 x 377 mm (H x W)
  • Usable depth: 225 mm

The vault doors are fitted with cylindrical locks with two keys.

The opening angle of the door is greater than 90°.

All vaults can be numbered.

Interior equipment of Basic safes

Interior equipment of Basic safes
contact