Welded Modulprim vault room

Vault room in modular construction where industrially produced elements are assembled on-site using welding.

The advantages of the welded Modulprim vault room are thin walls, quick construction, and the possibility of installation in various buildings. The individual elements are welded together, which gives the structure compactness. However, the entire vault room can be disassembled and moved to another location.

European standards and different safety levels
Modulprim vault rooms comply with the high European standard EN 1143-1 and the Slovenian standard SIST EN 1143-1, which define burglar-resistant security levels based on burglar-resistance grades. A choice of different security levels is possible.

Certified quality
The Modulprim system has been tested by the Verband der Schadenversicherer (VdS) Cologne (Germany) accredited testing laboratory and has received all relevant certificates. The VdS label on the products confirms that they are of high quality, have been properly tested, and that production is controlled.

Table of certified welded Modulprim vault room models

Model	EN 1143-1 resistance grade	Standard		Optional
Model	EN 1143-1 resistance grade	Wall thickness [mm]	Weight / m² [kg]	Wall thickness [mm]	Weight / m² [kg]
MODULPRIM N	N / 30 RU	55	60	N/A*	N/A*
MODULPRIM 1	I / 50 RU	55	70	N/A*	N/A*
MODULPRIM 2	II / 80 RU	70	200	55	155
MODULPRIM 3	III / 120 RU	70	200	55	155
MODULPRIM 4	IV / 180 RU	70	200	N/A*	N/A*
MODULPRIM 5	V / 270 RU	70	200	55	196
MODULPRIM 6	VI / 400 RU	85	270	N/A*	N/A*
MODULPRIM 7	VII / 600 RU	100	330	N/A*	N/A*
MODULPRIM 8	VIII / 825 RU	135	480	N/A*	N/A*
MODULPRIM 9	IX / 1050 RU	150	530	125	450
MODULPRIM 9 CD	IX CD/10000 RU	125	480	N/A*	N/A*
MODULPRIM 10	X/1350 RU	150	530	N/A*	N/A*
MODULPRIM 10 CD	X CD/10000 RU	150	560	N/A*	N/A*

*We offer standard only.

Elements of welded Modulprim vault rooms

Ceiling and floor elements

The length of the elements or slats is expected to be up to approx. 3000 mm, with additional loads on the ceiling elements of approx. 100 kg/m². Longer spans are possible with additional ceiling beams and support columns. Special requests are handled individually.
Construction of elements (slats)

Double-walled infill made of special reinforced armouring. Sheet metal casing. Easy installation of internal linings.
Internal linings

The inside of the elements is metal and painted with a primer (provided by the manufacturer). Further processing by arrangement and selection.

The floor linings of your choice can be glued. Wall linings of choice (plasterboard, wood or metal slats) are attached to purpose-fitted profiles. Ceiling linings or suspended ceilings are attached to purpose-built profiles.
Cable ducts

All elements have two cable openings, each with an internal diameter of 20 mm. The primary purpose of the openings is to simplify cable installation. The secondary purpose of the openings is to simplify the transport and assembly of the elements.
Ventilation

For ventilation (forced ventilation), a certified system with an opening of 250x60 mm and a ventilation box is integrated in the wall element, on the inside. A ventilation device (fan, ventilation system) can be connected from the outside.
Vault doors

Standard version with optional lock. Optionally, an additional day door (see brochure "Vault doors") is available.
Aeration

For aeration, a certified system of ventilation openings (natural ventilation) with a cross-section of approx. 150 cm² is integrated in the wall elements at the top or bottom. The number of ventilation systems is determined by the size of the vault room.
External cladding

Treatment according to the client's choice. Cladding in plasterboard, wood or metal slats. No external cladding on existing walls (slats).
EMA burglar alarm system

Pre-preparation for the installation of the components of an automatic burglar alarm system.